Home About us Products List Workshops Feedback Contact Us Email Login    

Mesh Panels Series
Welded Mesh Panels PVC Welded Mesh Panels Galvanized Welded Mesh Panels Crimped Welded Mesh Panels

Reinforcing Construction Mesh
Reinforcing mesh Rib reinforcing bar

Welded Wire Mesh Series
Galvanized Welded Wire Mesh PVC Welded Wire Mesh Stainless Steel Welded Wire Mesh

Security Bastion Series

HESCO Bastion Concertainer Bastion

Wire Mesh Products Processed

Barbecue grill Netting Wire Mesh Basket Wire Mesh Fence
webYong Sheng Wire Mesh
Reinforcing Mesh

With many years experience in the production of reinforcing mesh, Yong Sheng is a leading supplier of customised reinforcing products to most industry sectors. Reinforcing mesh has a wide variety of uses, ranging from the ordinary household to heavy industry.

In many construction applications such as reinforcing, a welded mesh fabric is preferred to rebar, particularly if Ferro-Fabrik is used. Ferro-Fabrik is a top quality product conforming to SANS 1024/2006. It has greater features and strengths than rebar (minimum 485Mpa) allowing a material saving of 8%, and allows for time saving when fixing on site.

Features of reinforcing mesh

  • The unique deformed wire pattern (curry pattern) offers superior bonding, improved stress distribution and crack-width control
  • Ferro-Fabric is available in a wide range of diameters and apertures. The products can be bent to shape as required
  • Manufactured from hard drawn wire (smooth) and cold rolled wire (deformed)
  • All intersections are resistant-welded thereby not reducing the tensile strength of the wires
  • Mesh has an average shear strength equal to 80% of the wire strength
  • The wire used has physical properties which are rigidly controlled to produce mesh with maximum weld strength combined with ductility
  • The steel specifications allow for cold rolled wire with a minimum ultimate tensile strength of 510Mpa and a high resistance to fatigue
  • Mesh is available in black (pre-galvanised) and galvanised sheets or rolls
  • Also available on request: plastic coated and hot dipped (galvanised) mesh
Quality Control

Reinforcing mesh is produced to highest quality standards and complies to ISO 9002. Thorough testing of wire strength,
welds and aperture sizes is continuously performed at all stages of the manufacturing process. Final inspections ensure
that highest standards are maintained.

Standard Sizes

Reinforcing mesh is available in rolls (60m x 2,4m) and sheets (6m x 2,4m), manufactured according to standard sizes.
Wire diameters vary from 3,55mm to 12mm. Mesh aperture can be as small as 100mm x 100mm.

Special Mesh

Specialised machinery is used to produce weldmesh with non-standard aperture sizes. The spacing of wires in either
direction is variable between 25mm and 150mm. Customised mesh is available on request according to specifications
provided.

the Reinforcing Mesh Data Sheet
Standard sizes of welded mesh fabric
Specifications: Sheets: 6m x 2,4m or Rolls: 60m x 2,4m
 
Based on SABS 1024/2006 specifications for welded steel fabric for concrete reinforcement
SHEETS ONLY SHEET OR ROLLS SHEETS ONLY SHEETS
OR
ROLLS
MR Reference
number		 888 746 617 500 395 311 245 193 100 156 200 1085 943 772 655 517 433 341 289 278 226 133
Mesh Size Nominal
Pitch of
Wires		 Main
mm		 200 200 200 200 200 200 200 200 200 100 100 100 100 100 100 100 100 100 100 100 100 100
Cross
mm		 200 200 200 200 200 200 200 200 200 100 100 200 200 200 200 200 200 200 200 300 300 300
Wire Sizes Main
mm		 12 11 10 9 8 7,1 6,3 5,6 4,0 3,55 4,0 12 11 10 9 8 7,1 6,3 5,6 6,3 5,6 4,0
Cross
mm		 12 11 10 9 8 7,1 6,3 5,6 4,0 3,55 4,0 8 8 7,1 7,1 6,3 6,3 5,6 5,6 4,0 4,0 4,0
Cross
Sectional
Area
Per Meter
Width		 Main
mm2		 566 475 393 318 251 198 156 123 63 99 126 1131 951 786 636 503 396 312 246 312 246 126
Cross
mm2		 566 475 393 318 251 198 156 123 63 99 126 251 251 198 198 156 156 123 123 42 42 42
Nominal Mass
per m2		 kg 8,88 7,46 6,17 5,00 3,95 3,11 2,45 1,93 1,00 1,56 2,00 10,85 9,43 7,72 6,55 5,17 4,33 3,41 2,89 2,78 2,26 1,33
  SQUARE GUNITE STRUCTURAL LONGITUDINAL


The MR Reference Number is the nominal mass in kilograms per square meter multiplied by 100.
The sizes given above are standard and are the most generally used. We can, however, manufacture mesh to other specifications,
both in size of wires and spacing.
Hard drawn wire to British standards 4482 has a minimum breaking strength of 510MPa and a minimum yield point of 485MPa.
Full size section of wires

Design specifications for special mesh
Mass at various spacing kg/m2

Wire Size Mass
Kg/m 		Spacing of wires mm Wire Size
50 75 100 125 150 175 200 225 250 275 300
12 0,888 17,76 11,84 8,88 7,10 5,92 5,07 4,44 3,94 3,55 3,23 2,96 12
11 0,746 14,92 9,95 7,46 5,97 4,97 4,26 3,73 3,32 2,98 2,71 2,49 11
10 0,617 12,33 8,23 6,17 4,94 4,11 3,53 3,09 2,74 2,46 2,24 2,06 10
9 0,499 9,99 6,66 4,99 3,99 3,33 2,85 2,50 2,22 2,00 1,81 1,66 9
8 0,395 7,90 5,26 3,95 3,16 2,63 2,26 1,97 1,75 1,58 1,44 1,32 8
7,1 0,311 6,22 4,14 3,11 2,49 2,07 1,78 1,55 1,38 1,24 1,13 1,04 7,1
6,3 0,245 4,90 3,27 2,45 1,96 1,63 1,40 1,22 1,09 0,98 0,89 0,82 6,3
5,6 0,193 3,87 2,58 1,93 1,55 1,29 1,11 0,97 0,86 0,78 0,71 0,64 5,6
4,0 0,099 1,98 1,32 0,99 0,79 0,66 0,57 0,50 0,44 0,40 0,36 0,33 4,0

Cross sectional areas at various spacing mm2 per meter
Area at various spacing

Wire Size Area mm2 Spacing of wires mm Wire Size
50 75 100 125 150 175 200 225 250 275 300
12 113,14 2263 1509 1131 905 754 646 566 503 453 411 377 12
11 95,07 1901 1267 951 761 634 583 475 423 380 346 317 11
10 78,57 1571 1048 786 629 524 449 393 349 314 286 262 10
9 63,64 1273 849 636 509 424 364 318 283 255 231 212 9
8 50,29 1006 670 503 402 335 287 251 223 201 183 168 8
7,1 39,61 792 528 396 317 264 226 197 176 158 144 132 7,1
6,3 31,18 624 416 312 249 208 178 156 138 125 113 104 6,3
5,6 24,64 493 329 246 197 164 141 123 109 99 90 82 5,6
4,0 12,57 251 168 126 101 84 72 63 56 50 46 42 4,0